New-Tech's ASPS-WI-SS Sequence of Operations


Sequence of Operations These are our most popular Sequence of Operation for the Automatic Sash Positioning System, we will customize any of these sequences to fit your needs.
	ASPS-SS-AP ASPS-SS-PB ASPS-SS-TH ASPS-SS-AM ASPS-WI-SS

ASPS™ Sash Operator The Automatic Sash Positioning System is a sash closer for any vertically rising fume hood sash.
	ASPS™ Details ASPS™ Specifications ASPS™ SEQUENCE OF OPERATIONS ASPS™ Cost Savings Solution ASPS™ Energy Savings NFPA-45: UBC vs. ASPS™ The ASPS™ Try It Offer ASPS™ Discount Program NEW ASPS™ Video



TOLL FREE: (866) 631-8324 FAX: (989) 631-8362 Email: Technical Sales

ASPS™ Sequence of Operation (5 of 5)

Automatic/Push Button Mode Automatic Sash Positioning System for
Dual Overlapping Vertically Rising Sash Walk-In Fume Hoods
ASPS-WI-SS

With the mode switch in the “AUTO OPEN” position the Automatic Sash Positioning System shall operate as follows on the upper sash:
1. With the lower sash closed to floor and when a laboratory technician is sensed in front of the fume hood, the upper sash shall open in less than 3 seconds to a working height of 18 inches ±1 inch (specify for installation).
2. Once the sash has risen, the laboratory technician shall be able to manually move the sash to a higher or lower position without releasing any type of sash locks.
3. Once NO moving objects are sensed in front of the fume hood, the control module shall delay 60 seconds (adjustable), then slowly close the sash in less than 10 seconds.
4. During sash closure, if an object is sensed in the path of the sash, the amber light illuminates and the sash stops without making contact with the object. When a laboratory technician is sensed in front of the hood, the sash will re-open allowing the removal of the object.
5. Upon power or instrument air failure the upper sash shall be manually movable.
6. During equipment change out with the lower sash is raised, a red light is illuminated and the Automatic Sash Positioning System is disengaged allowing the upper sash is able to be manually movable.
With the mode switch in the “PUSH BUTTON” position the Automatic Sash Positioning System shall operate as follows on the upper sash:
1. With the lower sash closed to floor and when a laboratory technician is sensed in front of the fume hood and the “Push to Open” button is activated, the upper sash shall open in less than 3 seconds to a working height of 18 inches ±1 inch (specify for installation).
2. Once the sash has risen, the laboratory technician shall be able to manually move the sash to a higher or lower position without releasing any type of sash locks.
3. Once NO moving objects are sensed in front of the fume hood, the control module shall delay 60 seconds (adjustable), then slowly close the sash in less than 10 seconds.
4. During sash closure, if an object is sensed in the path of the sash, the amber light illuminates and the sash stops without making contact with the object. When a laboratory technician is sensed in front of the hood and the “Push to Open” button is activated, the sash will re-open allowing the removal of the object.
5. Upon power or instrument air failure the upper sash shall be manually movable.
6. During equipment change out with the lower sash is raised, a red light is illuminated and the Automatic Sash Positioning System is disengaged allowing the upper sash is able to be manually movable.
Additional options for this Automatic Sash Position System
1. Object Alarm: while the amber light is illuminated an audible alarm sounds.
2. Sash Interference Dry Contact: while the amber light is illuminated a dry contact closes for remote monitoring by building systems.
3. Automatic Fume Hood Light: when a laboratory technician is sensed in front of the fume hood a 10Amp SPST dry contact will close allowing the fume hood light to be illuminated.